A pair of crochet slippers is one of the cosiest things you can make for winter. They keep your feet warm on cold floors, they are soft enough to wear all evening, and they make a lovely handmade gift for anyone who is always complaining about cold toes.
This free crochet slipper pattern is written in UK terms with US conversions. Each slipper is worked in one piece: a round toe, a tube for the foot, then rows for the heel and a single seam at the back. It uses only double crochet in chunky yarn, so it is quick and beginner friendly. There are two adult sizes, a diagram, and tips for adding a non-slip sole.
Quick answer: To crochet slippers, make a magic ring and work increasing rounds of double crochet to form the toe, then plain rounds for the foot. Turn and work rows over most of the stitches, leaving 6 to 8 stitches unworked for the opening, until the slipper is 1cm shorter than your foot. Fold the last row in half, slip stitch the heel closed and edge the opening.
Why you will love these crochet slippers
- One stitch only. The whole slipper is double crochet, the easiest crochet stitch.
- Almost no sewing. Each slipper is one piece with just one short seam at the heel.
- Quick. Chunky yarn means you can make a pair in an evening or two.
- Made to fit. You work the length to match your own foot, so they fit perfectly.
Most of the slipper is worked in rounds from a magic ring. If you have not tried one before, see our magic ring tutorial.
What you need
| Item | What to use |
|---|---|
| Yarn | Chunky (bulky) wool blend or acrylic: about 150g for the women's size, 200g for the men's size (for the pair) |
| Hook | 6mm (UK 4, US J-10) |
| Extras | Stitch marker, tapestry needle, scissors, a tape measure; optional suede soles or non-slip fabric paint |
A wool blend is warm and hard wearing, and acrylic is easy to wash. Avoid pure cotton, which is cold and can stretch. Chunky is weight 5 (bulky) in the Craft Yarn Council yarn weight system. Our crochet yarn guide explains the other weights, and our crochet hook size guide has a full UK and US conversion chart.
Abbreviations (UK terms)
| UK term | US term | Meaning |
|---|---|---|
| MR | MR | magic ring |
| ch | ch | chain |
| sl st | sl st | slip stitch |
| dc | sc | double crochet (US single crochet) |
| inc | inc | 2 dc in the same stitch |
| st(s) | st(s) | stitch(es) |
If you usually follow US patterns, keep our UK vs US crochet terms chart handy.
Tension and sizes
11 dc and 12 rounds = 10cm on a 6mm hook. Work firmly: tight stitches make a dense, warm fabric that does not stretch out of shape.
Instructions are written for the women's size, with the men's size in brackets. Where there is only one number, it is the same for both sizes.
| Size | UK shoe size | Foot length | Stitches around | Opening stitches |
|---|---|---|---|---|
| Women's | UK 3 to 6 | 22 to 25cm | 24 | 6 |
| Men's | UK 7 to 10 | 25.5 to 28.5cm | 30 | 8 |
Measure your foot from the back of the heel to the tip of the longest toe before you start. You will use this measurement to decide how long to make the slipper.
How the slipper is made
The diagram shows the three parts: the toe worked in increasing rounds, the foot worked in plain rounds, and the heel worked back and forth in rows, then folded and seamed.

Free crochet slipper pattern
Make two slippers the same. Work the toe and foot in continuous spiral rounds without joining, and move your stitch marker up to the first stitch of each round.
Toe
Rnd 1: 6 dc in a MR. Pull the ring closed. (6)
Rnd 2: inc in each st around. (12)
Rnd 3: (1 dc, inc) x6. (18)
Rnd 4: (2 dc, inc) x6. (24)
Men's size only, rnd 5: (3 dc, inc) x6. (30)
You now have 24 (30) sts.
Foot
Next rnds: 1 dc in each st around. (24 (30))
Repeat this round until the slipper measures 9cm (10cm) from the tip of the toe. Try it on: it should cover your toes and reach just past the widest part of your foot. Work 1 more dc so you finish at the side of the slipper, then turn.
Heel
Now work in rows to leave an opening for your foot.
Row 1: ch 1 (does not count as a st), 1 dc in each of the next 18 (22) sts, turn. Leave the remaining 6 (8) sts unworked for the opening at the top of the foot. (18 (22))
Row 2: ch 1, 1 dc in each st to the end, turn. (18 (22))
Repeat row 2 until the whole slipper, from the tip of the toe to the end of the heel rows, measures your foot length minus 1cm. The fabric stretches, so a little negative ease gives a snug fit. Do not fasten off.
Heel seam
Fold the last row in half so the two edges meet. Working through both layers, sl st across 9 (11) sts to close the back of the heel. Fasten off, leaving a tail, and turn the slipper right side out.
Edging
Join yarn at the back seam and work 1 round of dc evenly around the opening, working 1 dc into the side of each heel row and 1 dc into each of the 6 (8) sts at the front. Sl st to the first dc. For a firmer top edge that does not gape, work a second round of sl st. Fasten off and weave in all the ends.
The best yarn for crochet slippers
Slippers get more wear than almost any other crochet project, so the yarn matters. Here is how the most common choices compare:
| Yarn | Warmth | Wear | Washing |
|---|---|---|---|
| Chunky wool blend (wool with 20 to 30% nylon) | Very warm | Hard wearing, does not wear thin quickly | Hand wash |
| Chunky acrylic | Warm | Good, may pill over time | Machine washable |
| Pure wool | Very warm | Can felt and wear thin at the heel | Hand wash only |
| Cotton | Cool | Stretches and loses shape | Machine washable |
For most people a wool blend with a little nylon is the best yarn for crochet slippers. The nylon makes the heel and toe last much longer. If you want extra cushioning, hold two strands of aran yarn together instead of one strand of chunky yarn; this gives a similar thickness and lets you mix two colours for a tweedy look.
How to make your crochet slippers non-slip
Crochet slippers can be slippery on wooden or tiled floors. Here are three easy ways to add grip:
- Non-slip fabric paint: dot puff paint or sock grip paint onto the sole in a pattern of small dots, then leave it to dry for 24 hours.
- Liquid latex: brush a thin layer of liquid latex onto the sole and let it dry. It is waterproof and very grippy.
- Suede soles: sew on a pair of ready-made suede or leather slipper soles with strong thread. These also make the slippers last much longer.
Ideas for your crochet slippers
- Cuff: after the edging, work 4 more rounds of dc around the opening for an ankle cuff, and fold it down.
- Two colours: work the toe in a contrast colour, or change colour every 2 rounds for stripes.
- Pom poms: sew a small pom pom to the front of each slipper for a playful look.
- Christmas slippers: make them in red with a white cuff for a Father Christmas look, and sew a bell to the toe.
- Winter gift set: make a matching crochet hat, crochet mittens or hot water bottle cover in the same yarn.
Making slippers for a little one? Our easy crochet baby booties use the same idea at a tiny size. For more presents, see our easy crochet gifts list.
How to get the perfect fit
The best thing about making your own crochet slippers is that you can fit them exactly. Try the slipper on at three points as you work. After the toe, it should cover your toes snugly without squashing them. After the foot rounds, the edge should sit just behind the widest part of your foot. During the heel rows, stand up and check the length, because feet spread a little when you stand.
If you are making slippers as a surprise gift, use the person's shoe size and the table above, and make the heel rows 1cm shorter than their foot length. Crochet stretches with wear, so a slightly snug pair will soon feel just right.
Crochet slippers as gifts
Handmade crochet slippers are a lovely Christmas present, especially for grandparents, students in cold flats and anyone who works from home. Wrap them with a bar of soap or a hot chocolate sachet for a cosy gift set. Because the pattern is quick, you can make a whole family set in different colours over a few weekends. Add a small tag with the yarn care instructions so they last for years.
Common problems and how to fix them
The crochet slippers are too tight
Your tension is tighter than 11 dc to 10cm. Go up to a 6.5mm hook, or add one more increase round to the toe so you have 30 (36) sts around.
The slippers are too loose and slip off
Work a round of sl st around the opening, or thread a length of yarn through the edging round and tie it in a bow at the front.
There is a pointed bump at the heel
This happens if the heel rows are too long. Undo the seam, remove 1 or 2 rows and seam again. You can also sew a few stitches across the corners on the inside to round them off.
The toe looks too flat
The toe needs more depth. Work 1 or 2 extra plain rounds before the foot section measurement, and check that you pulled the magic ring tight.
Caring for your crochet slippers
Hand wash wool blend slippers in cool water and dry them flat, stuffed with a towel so they keep their shape. Acrylic slippers can usually go in the washing machine on a gentle cycle in a mesh bag. Do not tumble dry slippers with painted or latex soles.
Make a matching crochet balaclava in the same yarn for a cosy winter set.
Frequently asked questions about crochet slippers
Are crochet slippers easy to make?
Yes. This pattern uses only double crochet, worked in rounds and then rows, with one short seam at the heel. It is a good next project after a hat or a scarf.
How much yarn do I need for crochet slippers?
About 150g of chunky yarn for a pair of women's slippers and about 200g for a pair of men's slippers.
How long does it take to crochet a pair of slippers?
About 3 to 5 hours for a pair in chunky yarn.
How do I stop crochet slippers being slippery?
Add dots of non-slip fabric paint, a thin layer of liquid latex, or sew on suede soles.
Can I make this crochet slipper pattern in US terms?
Yes. Use US single crochet wherever the pattern says dc. The stitch counts stay the same.